Synology E10G18-T1
Single-port, high-speed 10GBASE-T/NBASE-T add-in card for Synology servers
Synology Products
Synology Add-in Cards
Overview:
Flexible and economic solution for 10GbE adoption
Equipped with an RJ-45 connector and supports IEEE 802.3an/bz (10GBASE-T/NBASE-T) and 802.3x, E10G18-T1 helps you smoothly migrate to a 10GbE networking environment with your existing infrastructure. Supporting backward compatibility and auto-negotiation between 10Gbps, 5Gbps, 2.5Gbps, 1Gbps, and 100Mbps, E10G18-T1 is an economic solution to overcome the data transmission bottleneck for small businesses and home users.
Technical Specifications:
Hardware Specifications: | |
---|---|
General Specifications | |
Host Bus Interface | PCIe 3.0 x4 |
Bracket Height | Low Profile and Full Height |
Size (Height x Width x Depth) | 68.1 mm x 86.0 mm x 13.6 mm |
Operating Temperature | 0°C to 40°C (32°F to 104°F) |
Storage Temperature | -20°C to 60°C (-5°F to 140°F) |
Relative Humidity | 5% to 95% RH |
Warranty | 5 Years |
Network | |
IEEE Specification Compliance |
|
Data Transfer Rates | 10 Gbps |
Network Operation Mode | Full Duplex |
Supported Features |
|
Compatibility | |
Applied Models |
|
Notes | DSM version requirement: 6.2-23739-2 onward (or 6.1-15284-2 onward with DSM 6.1) |
Documentation:
Datasheet for Synology E10G18-T1 Add-in Card is coming soon

5 Year Warranty
Built to handle intensive workloads, Synology network add-in-cards are backed by Synology's 5 year limited warranty.
- All Prices are Inclusive of GST
- Pricing and product availability subject to change without notice.
Synology Products
Synology Add-in Cards